| 1. | Water - proofing of buildings - part 3 : requirements to the ground and working properties of materials
建筑物的防水层.第3部分:地面的要求和材料的工作特性 |
| 2. | Under the thoroughly study of the nonlinear working properties of the flux regulator valve , models of each parts of ventilating control system has been set up
在深入分析流量调节阀非线性工作特性的基础上，建立了充气控制系统各个环节的数学模型。 |
| 3. | To satisfy the needs of project design , it is necessary to study for calculation method and the working properties of pile foundation under reciprocating load role
为了满足工程设计的需要，有必要对桩基在往复荷载作用下的工作性状和计算方法进行研究。 |
| 4. | Therefore must pay attention to work property right mold , this is not only the needs of state - owned enterprise reform , it is also the inner requirement of socialist public system
通过对劳动产权理论和现实形态的深入研究，寻找出国有企业建立劳动产权制度的新路径? ?国有企业分股制。 |
| 5. | Many engineering experience demonstrate that in order to elevate subbase working properties , lower project investment , prolong pavement using life - span and raise synthetical benefic ,
大量的工程实践表明，为了提高基层工作性能，延长路面使用寿命，必须在配合比设计时将抗裂性考虑在内。 |
| 6. | But the research on its bearing mechanism and work properties is insufficient . especially on the bearing properties of the large - diameter and medium - long socketed piles in mudstone foundation . the xigeda - mudstone is widely distributed in xichang and panzhihua regions of sichuan province
但对其受力机理和工作特性的研究一直不很充分，特别是对泥岩地基中大直径、中长嵌岩桩的承载性状的研究还比较缺乏。 |
| 7. | A new type piezoelectric active member adopted in the thermo - modality control of intelligent structure was designed and manufactured . and the relations between its working properties , output displacement , output force , etc . and various influence factors were studied through experiments
设计制造一种可用于智能结构热动态控制的新型压电主动构件，并通过实验研究其工作性能：输出位移、输出力特性与各种影响因素之间的关系。 |
| 8. | ( 4 ) in order to improve the system and its working function , a hydraulic controlled direction valve is connected in the main oil circuit to control the differential of the piston . then the dimentions of the cylinder and the piston are reduced , improving the working properties
广东工业人学工学顾十学位论义（ 4 ）为进一步改进设计方案，提高其工作性能，在主油路中加一液动换向阀，控制活塞的差动，从而将减小油缸和活塞的尺寸，提高工作性能。 |
| 9. | The technology of refitting of diesel using cng and petrol engine using lpg is proposed . the working property of diesel using cng and petrol engine using lpg is analyzed , the main technology problems after refitting of ngv not only are deduced but also are partly solved
本文综合分析柴油机燃用cng以及汽油机燃用lpg的改装技术，评价了柴油机燃用cng的工作性能以及汽油机燃用lpg的工作性能，总结了天然气汽车改装后存在的主要技术问题，并提出了相应的解决办法。 |
| 10. | To this problem , on the basis of the work property and characteristics of the water turbine ' s blade . the finite element mechanics model of blade vibration characteristic is described with the eight - node three - dimensional nonconforming and all parts of blade damp are analysised , the calculating model of blade damp is built , the tackling method of blade damp in calculating of dynamic stress is presented
本文根据水轮机叶片的特点和工作性质，采用空间八结点非协调等参单元描述水轮机叶片运动特性的有限元力学模型，详细分析了水轮机叶片阻尼各组成部分，并建立了叶片阻尼的计算模型，提出了叶片阻尼在动应力计算中的处理方法。 |
